Pair of 7-inch LED projector headlights showing white and amber halos for Mazda MX-5 Miata NA

BOOSTED INTERNATIONAL

MX-5 Miata NA - Halo LED 7" Projector Headlights

Name: MX-5 Miata NA - Halo LED 7" Projector Headlights
SKU: BI-99615
Price: 245.38 USD
Availability: InStock

★★★★★ Quality tested

Classic pop-ups. A fresh LED look.

Refresh your Mazda MX-5 Miata NA with 7-inch LED projector headlights and white or amber halos.

Three low-beam projectors and one large high-beam projector per headlight.
Plug-and-play main headlight connection for standard NA assemblies.
Optional halos use separate spade connectors and require additional wiring.

Supplied as a pair, including left and right headlights.

$245.38

or 4 interest-free payments of $61.35 withafterpay

Express checkout

MADE FOR YOUR CHASSIS DESIGNED FOR DIY INSTALLS FACTORY FIT BUILT FOR LONGER LIFE

Product story

Classic pop-ups. A fresh LED look.

Keep the pop-up character. Update the lighting.

Give your Mazda MX-5 Miata NA (Eunos Roadster) a modern front end while keeping its unmistakable pop-up headlights. These 7-inch LED projector units replace the old halogen headlights with a clean projector design and distinctive halos.

Lighting features

Low beam: three projectors in each headlight.
High beam: one large projector in each headlight.
White or amber halos: separate power connections for each function.

Supplied as a pair

One left 7-inch halo LED projector headlight.
One right 7-inch halo LED projector headlight.

Main headlights: plug and play

The main headlight connection plugs into the factory harness and fits standard NA 7-inch assemblies without housing modification.

A straightforward main-unit swap can take approximately five minutes when the standard fittings are in good condition. The numbered installation guide is in the Installation section below.

Optional halo wiring

Green power connector = white halo: connect to a suitable parker, parking-light or running-light positive circuit.
Red power connector = amber halo: connect to a suitable indicator or turn-signal positive circuit.

Halo wiring is separate from the plug-in main headlight connection. Insulate all connections and keep wiring clear of moving parts.

Fitment

1989–1997 Mazda MX-5 Miata NA with standard 7-inch round pop-up headlight assemblies. Not compatible with NB, NC or ND models. Check compatibility before ordering if the car has aftermarket buckets, conversions or modified wiring.

Markings and setup

E-marked with DOT/SAE markings. Confirm the beam configuration, alignment and applicable local requirements before road use.

Product views

More angles from the gallery.

Mazda MX-5 Miata NA with white halo headlights and front LED DRLs installed

Mazda MX-5 Miata NA with amber halo headlights and front LED indicators illuminated

White halo headlights installed on a Mazda MX-5 Miata NA

Customer cars

What customers say.

Leave a review

Name Email Rating Photos & videos (up to 6) JPG, PNG, WebP, GIF, MP4, WebM or MOV. Up to 50 MB per file; 255 MB total. MP4 is recommended for video.

Review

Good to know

The stuff that matters.

Specifications

Compatibility

1989–1997 Mazda MX-5 Miata NA
Requires standard 7-inch round pop-up headlight assemblies and compatible factory wiring
Not compatible with MX-5 NB, NC or ND
Check vehicles with aftermarket headlight buckets, conversions or modified wiring before ordering

Installation

Raise the pop-up headlights, switch off the ignition and lights, and safely isolate the headlights against accidental movement. Remove the plastic headlight shroud and prevent electrical shorts while working.

Support the original headlight. Remove the three Phillips-head screws securing the metal retaining bracket, lift off the bracket and unplug the headlight. These are the retaining screws, not the beam-adjustment screws.

Plug the new LED headlight into the factory connector. For optional halos, connect the GREEN power lead (WHITE halo) to a suitable parker/parking/running-light positive circuit and the RED power lead (AMBER halo) to a suitable indicator/turn-signal positive circuit. Insulate all connections and route wiring clear of moving parts.

Seat the new headlight in the bucket and refit the factory metal retaining bracket using its three Phillips-head screws.

Reinstall the plastic shroud and repeat on the other side. Restore power and test low beam, high beam and any connected halos. Check pop-up clearance and check or adjust beam alignment before driving.

Halo operation follows the connected circuit. Automatic override or switchback when both halo functions are powered is not specified.

Warranty

Shipping & Returns

Worldwide shipping is available. Contact us for product-specific shipping and returns information.

Frequently asked questions

Are these headlights supplied as a pair?

Yes. Supplied as a pair, including left and right 7-inch LED projector headlights.

Which MX-5 models do these fit?

They are for 1989–1997 Mazda MX-5 Miata NA models with standard 7-inch round pop-up headlight assemblies. They are not for NB, NC or ND models. Check modified buckets or wiring before ordering.

Are the headlights plug and play?

The main headlight connection plugs into the factory harness on standard NA assemblies. The optional white and amber halo functions require separate wiring.

How are the white and amber halos connected?

The green power connector operates the white halo and can connect to a suitable parker/parking/running-light positive circuit. The red power connector operates the amber halo and can connect to a suitable indicator/turn-signal positive circuit. Insulate all connections and keep wiring clear of moving parts.

What is the projector layout?

Each headlight has three projectors for low beam and one large projector for high beam.

How long does installation take?

A straightforward main-unit swap can take approximately five minutes with standard fittings in good condition.

What markings do the headlights have?

They are E-marked with DOT/SAE markings. Confirm the beam configuration and local requirements for your vehicle and location before road use.

Are the front indicator/DRL lights included?

This listing includes only the left and right headlights. The separate MX-5 LED Conversion Bundle also includes front indicator/DRL units, the third-brake-light LED insert and an included load resistor.